Professional Line Road Marking Remove Machine, Used for Efficient Surface Cleaning and Removal

• Customization: Available
• Application: Airports, Factories, Parking Lots, Road Markings, Schools, Sports Fields, Warehouses
• Control System: Semi-automatic
• Model NO.: HW-Recycled high-pressure water removal line
• Power Source: Diesel
• Type: Self-propelled
• Warranty: One Year
• Engine: Weifang Huadong Six-Cylinder National II Engine
• Power: 173kw
• Speed: 1800r/Min
• Pump Speed: 530r/Min
• Pressure: 160MP
• Flow: 36L/Min
• Plunger Diameter: 20mm
• Plunger Stroke: 85mm
• High Pressure Seal: Imported Molded Seal
• Target Pump: Primary Target Pump Maximum 6kg Target
• Install Piping System: Stainless Steel and Crimp Top
• Filter: Stainless Steel Vertical Filter Secondary Filter
• Water Supply Protection System: Including Water Supply Low-Pressure Protection Sys
• Recovery System: Ssa Vacuum Pump, Pressure -0.4bar
• Water Tank: 3.7t Clean Water Tank, 4t Sewage Tank
• Transport Package: Wooden Case
• Specification: 4.1m*2m*2m
• Trademark: heavsty
• Origin: Jiangsuzhenjiang
• Production Capacity: 20000pieces/Year
• Package Size: 1.00cm * 1.00cm * 1.00cm
• Package Gross Weight: 1.000kg

Product Description

HW- High pressure water stripping car

The high pressure water stripping vehicle uses ultra-high pressure water jet technology to clean the road surface, and the removal of glue can be fully controlled from the cab. Special components such as high pressure water pump are integrated and installed in the protective cover, which can be easily separated from the vehicle. A uniquely designed turbine blade is installed on the robot arm to effectively recycle waste water, rubber, paint, etc. The cyclone vortex recyles the waste into the recycling tank at the same time, cleans the road surface after removing the glue twice, and can handle the ordinary vehicle license plate and inspect according to the regulations.

Specification

Products Pictures

Applications
Construction: Architectural Decoration,Industrial Manufacturing,Municipal Construction,Road Engineering.
Serve:Functional Signage and Facility Installation in Scenarios such as Sidewalks, Parks, and Communities.

Key Configurations

Recovery System: For scenarios with high environmental protection requirements, the recovery system is an essential configuration. It can recover the sewage and waste residues generated during the removal process, preventing environmental pollution.

Intelligent Computer Control System: Precise Control, More Stable Operation Quality, Automated Operation, Intelligent Management, and Enhanced Safety.

Ruby Nozzle:Industrial-grade Ruby Valve Core (with a hardness of HRC 90+, far exceeding the HRC 85 of conventional ceramic nozzles), featuring more than double the wear resistance and a service life of 800-1000 hours per single nozzle.

Key Configurations

Core of High-Pressure Pump: Independently developed three-stage plunger high-pressure pump (conventional two-stage pump in the industry), with a rated working pressure of up to 280MPa (peak pressure of 300MPa) and a flow rate of 60L/min. Compared with similar equipment (conventional pressure: 200-250MPa, flow rate: 45-50L/min), its impact force is increased by more than 30%.

Independent Dual-Power System: The main power drives the high-pressure pump for jetting, while the auxiliary power drives the negative pressure recovery device (with a suction force of up to -80kPa). The "water + marking debris" mixture generated during the removal process is recovered in real time.

Right-side 

Rear Side

Direct Front

Technical Specifications

(Custom configurations available upon request.)

Working speed	10-20m/min (according to line thickness)	Power	255kw
Engine	Weifang Weichai Power (Deutz) six cylinder country 2 discharge	Rotational speed	1800r/min
Pump speed	500r/min	Stress	2500 bar
Flow rate	40L/min	Plunger	Carbide 19.05
Delinear velocity	Maximum 30cm adjustable 15cm-30cm	Fuel tank	250L
High pressure seal	Imported high quality molding seal	Booster pump	Pre-booster pump up to 6kg
Filter	Double stainless steel vertical filter secondary filtration	Net weight:	8T (excluding truck)
Main engine size	3m*2.2m*2.25m dimensions can be customized according to the model	Lint remover	Optional self-rotating 20 nozzles or motor 12 /24 nozzles

After Sales Service

Standard Warranty: 12 months or 2,000 operating hours (whichever comes first).
Extended Warranty: Optional coverage up to 12 months.
After-sales Service: Lifetime After-sales Service
Training: On-site or remote operation/maintenance training.

Why Choose Us?

Other Products

OEM/ODM capabilities
Competitive pricing & bulk discounts
Fast shipping & customs clearance support
Turnkey project solutions

- Airport High pressure water glue remover

protection, and easy installation. It has a waterproof rating of IP67 and has passed CE certification. It is suitable for schools, parks, roadsides, factories, squares, etc. It has a warranty period of 3 years. Moreover, we can provide various styles to meet your needs.