Gasoline Engine Asphalt Road Line Removal Machine Road Marking Equipment

Product Description

Description:

The HW-23CX marking and removing machine stands as the pinnacle in the annals of mechanical removing machines. It is renowned for its remarkably low failure rate, high - efficiency operation, and the distinct advantage of not requiring bearing replacements. This machine exhibits an outstanding road grinding effect, along with ease of maintenance. Moreover, it comes equipped with a diverse range of tool - head modes, enabling it to seamlessly meet the demands of various road surfaces.
Latest Product Parameters

Power	Longxin 30hp gasoline engine
Oil Consumption	2-3L/H (with 95# gasoline)
Rotational Speed	3600r/min
Strip Width	26cm
Delining Depth	Adjust according to needs and ground conditions, generally not more than 1mm (0-3mm) per adjustment
Clearance Rate	About 1000-2000m²/ day
Tool Life	200,000 m²/ 100,000m²/ 10,000m²
Dimension	1.5*0.725*1.15m
Weight	Bare machine 210kg
	Polymer gold grinding head 33kg (3 blades/piece) a set of 13 pieces 200,000 square meters
	Welding alloy grinding head 35kg (9 blades/piece) a set of 13 pieces 100,000 square meters
	All alloy grinding head 33kg (12 blades/piece) a set of 42 pieces 10,000 square meters

• Power Source: Equipped with a Longxin 30 - hp gasoline engine, providing reliable and robust power for continuous operation.
• Fuel Consumption: Operates with a fuel consumption rate of 2 - 3L/H when using 95# gasoline, ensuring relatively economic operation while maintaining high - performance output.
• Rotational Speed: Runs at a consistent rotational speed of 3600r/min, guaranteeing stable and efficient working conditions for optimal road - marking removal.
• Strip Width: The machine is designed to achieve a strip width of 26cm, enabling precise and effective removal of markings in a single pass.
• Delining Depth: The delining depth can be adjusted according to specific needs and ground conditions. Generally, each adjustment is within the range of 0 - 3mm, with a maximum of not more than 1mm per adjustment to ensure accurate and damage - free removal.
• Clearance Rate: It can achieve a clearance rate of approximately 1000 - 2000m² per day, demonstrating high - efficiency in large - scale road - marking removal projects.
• Tool Life:
  • Polymer gold grinding head: Each set consists of 13 pieces, with 3 blades per piece. The tool life is up to 200,000 square meters, making it suitable for long - term and high - volume projects. The weight of a set is 33kg.
  • Welding alloy grinding head: A set contains 13 pieces, with 9 blades per piece. It has a tool life of 100,000 square meters. The weight of a set is 35kg, offering a balance between durability and performance.
  • All alloy grinding head: Each set includes 42 pieces, with 12 blades per piece. The tool life is 10,000 square meters, and the weight of a set is 33kg, designed for specific applications where high - precision and short - term intensive use are required.
• Dimensions: The machine has overall dimensions of 1.50.7251.15m, making it compact yet powerful, and easy to transport and operate in various work environments.
• Weight:
  • The bare machine weighs 210kg, which is lightweight enough for easy handling and movement during transportation and setup.
  • The additional weights of different grinding heads are specified above, contributing to the overall performance and functionality of the machine.

 

Our company sells Road stripping equipment including:HW-23CX marking and dewiring machine product technical parameters,HW-900 hot melt cold paint dual purpose wire remover,HW-1050 Hot melt old wire cleaning machine,HW-D390 marking and dewiring machine,Recycled high-pressure water removal line,HW- Mechanical recycling.

Product advantages

Main products

HW-618 Hot melt wiper scribing machine
618 passenger marking machine is a practical multi-functional standard mechanical marking equipment that is turned by turbine rollers. The equipment itself can be replaced according to the needs of users, such as the system, paint cylinder and other parts, to achieve hot melt extrusion coating, hot melting point coating, hot melt oscillation, two-component shake and scraping, two-component point coating, cold spray and other multi-function marking..
 

HW-660 multi-function extrusion frame marking car
• Fast construction speed and high efficiency
• It is a large construction equipment to reduce casualties caused by traffic accidents in the construction process
• Long maintenance free cycle and durable
• Extrusion construction process, precise control of paint consumption, avoid unnecessary consumption
• User-friendly, easy to use (cruise control, computer system, etc.)
• Rapid transformation of operation and construction mode, half an hour to achieve the installation of the marking equipment from one side to the other side
• Minimal maintenance (high quality components) and easy to maintain
• Marking equipment can be customized according to customer needs
 

HW- High pressure water stripping car
The high pressure water stripping vehicle uses ultra-high pressure water jet technology to clean the road surface, and the removal of glue can be fully controlled from the cab. Special components such as high pressure water pump are integrated and installed in the protective cover, which can be easily separated from the vehicle. A uniquely designed turbine blade is installed on the robot arm to effectively recycle waste water, rubber, paint, etc. The cyclone vortex recyles the waste into the recycling tank at the same time, cleans the road surface after removing the glue twice, and can handle the ordinary vehicle license plate and inspect according to the regulations.
 

 

HW- High pressure water glue remover
Compared to manual glue removal methods, airport glue removal vehicles can quickly and extensively remove glue marks on runways and other surfaces, effectively reducing runway downtime and ensuring the normal operation of airport flights.

 

Our company is a modern enterprise that integrates various services such as high-pressure water cleaning,road line and glue removal,automated road unmanned construction,and road marking.

Application

Company Profile

Company was officially established in Zhenjiang City,Jiangsu Province in 2020. At the beginning of its establishment,Heavsty built a 50 acre factory dedicated to equipment research and production. The company′s founder joined hands with his overseas R&D team to integrate transportation industry resources with advanced scientific research concepts and innovative R&D technologies,implement precise R&D and production. From the root,he simplifies the human construction process,enhances the safety coefficient and standardized operation of the project,reduces construction risks,and completes it in a more efficient and energy-saving way Engineering construction.

Workshop & equipment

Since its establishment,Heavsty has always adhered to the spirit of craftsmanship and firmly believed that profitability is the result of the enterprise,rather than the original goal. "Loyalty to innovation,continuous research and development,and layer by layer updating" is the long-term survival and development path of the enterprise. Heavsty has been committed to reducing problems and accidents during automobile transportation,ensuring people′s safety,and saving social costs. We continuously utilize our unique advanced technological advantages to develop new types of road machinery and equipment,and promote the construction and development of our country and even the world.

Exhibition & Our Partners

As an emerging enterprise in the industry,Heavsty will adhere to its original aspiration in the future development process,with higher standards of quality,stricter management,more humble attitude,more advanced equipment,and more professional technical service team,providing customers with services and quality,promoting the optimization of the transportation industry chain upgrade,forming an intelligent construction system,and striving to become a rising star in the industry,illuminating the world′s path with the light of technology.

Packaging & Shipping

FAQ

1.About Sample:
Free samples are not provided. If you have the need to have samples mailed, the postage incurred shall be borne by you.
2.About Price:
The pricing is flexible and subject to adjustment based on your order quantity or packaging requirements. Kindly indicate the desired quantity when submitting an inquiry.
3.About Booked time:
Generally speaking, the minimum order time is one month, but it may vary according to the quantity of the order.
4.About Custom - made products
welcome to discuss the details of our products with us. We can make design changes according to your needs.
5.About warranty:
We have great confidence in the quality of our products and take great care in their packaging, ensuring that they arrive to you in good condition. However, due to extended shipping times, there may be some superficial damage to the appearance of the product. Rest assured that this will not affect its performance. If any issues with quality arise, we will promptly address them.
6.About Payment or other question:
Pls email us or chat with us online directly.